Reely X6 Notice D'emploi page 55

Nod trimming:
If the hexacopter tries to drift forward, reduce the speed until the hexacopter is safely on its landing struts again. Now
push the trim button for the nodding function (also see figure 1, item 3) down or towards your body several times.
Push the pitch lever carefully forward and check if the adjustment was sufficient. Repeat the procedure until the model
does not show any tendency to drift to the front.
If the hexacopter tries to drift backwards, push the trim button for the nodding function up or away from your body.
The display shows the change of the rolling trimming at the trimming display (see figure 5, item 3). The set
value is stored automatically.
Pitch trim:
The hexacopter has no pitch trim. The button that can be used for trimming is used for operation of the on-board
camera of the hexacopter (see chapter 11).
Figure 19
55