Hand And Arm Vibrations; Sound Power Level - Husqvarna HTC T8 Manuel De L'opérateur

HTC T8/RT8/X8/RX8

3.5 Hand and arm vibrations

Hand and arm-weighted vibration levels [m/s
using equipment approved in accordance with ISO 5349-1:2001. The uncertainty of
measurement for the measuring equipment is given as ±2%.
The machine has been tested in accordance with ISO 5349-2:2001 and ISO 20643:2005 in
order to identify the operations that contribute to the most frequent vibration exposures. At
vibration levels > 2.5 m/s
below. For vibration levels > 5 m/s
ensure that the exposure time does not exceed the time specified in the table below.
Identified work conditions
Grinding/polishing

3.6 Sound power level

This machine has been tested for noise in accordance with ISO 3744:2010 and ISO 11201.
Measured using class 1 instruments as sound level meters. For information about sound level
power, see chapter Technical Data page 63.
18
2
2 the exposure time should be limited in accordance with the table
2 immediate measures must be taken by the employer to
Measured values [m/s
< 2.5 m/s 2
Information about the machine
] for HTC T8/RT8/X8/RX8 have been measured
Daily permitted exposure
2
]
(number of hours)
> 10 h
D003128, 02.00