Intended Use; Improper Use - Ega Master 79919 Manuel D'instructions

Remark: Measurement acc. to DIN EN ISO 15744
(1)
Remark: Measurement acc. to DIN EN ISO 28927-2 Measurement uncertainty K:1.5 m/s
(2)
The performance specifications are guide values only, they depend basically on the application,
the working pressure and the accessories used.
The manufacturer machines are designed for industrial use only.
Only trained, skilled personnel are allowed to operate the machine. Impact wrenches are
designed for the tightening and loosening of screw joints in a range of performance defined by
the manufacturer.
They have to be used in combination with appropriate:
• Power socket wrenches,
• extensions,
• joints,
• adapters.
It can be applied for:
• Construction, pipeline construction, chemical industry/refineries and offshore, as well as for
underwater use.
Any use deviating from the intended use as described is considered to be improper use.
• Working without personal protection equipment.
• Using the machine in an inadmissable area.
• Using the machine for drilling, mixing or grinding.
28
Vibration
(2)
ATEX Classification

INTENDED USE

IMPROPER USE

6,75 m/s2
II 2G c T5
Measurement uncertainty K:3 dB (A)
2