Riccar Prima R50SS Manuel Du Propriétaire page 15

OPERATION OF THE TANDEM AIR POWER NOZZLE
Turning On the Power Nozzle
The power nozzle can only be turned
on if the canister is also turned on. The
canister On/Off switch is located on
the main body. The power nozzle On/Off
switch is located on the handle. Simply
press the switch forward to engage the
power nozzle.
Reclining the Wand
Press the Handle Release Pedal located
on the back of the vacuum with your foot
to recline the handle (Fig. 1).
Removing and Inserting the Wand
Removing the wand from the power
nozzle allows you to use cleaning tools
for baseboard or ceiling cleaning. To
do this, first turn the power nozzle and
canister off. Then, press the wand release
button, pull the wand out and turn the
canister on (Fig. 2).
To reinsert the wand into the power nozzle,
turn off the canister and simply press the
wand back into the neck of the power
nozzle. The wand will then click into place.
Jammed Brushroll Warning Lights
This power nozzle is equipped with
a safety system that protects it from
a jammed situation. Items that cause
jammed brushrolls include socks,
excessive threads and corners of area
rugs. The warning indicator lights in the
headlight lens will change to flashing red
should this condition occur (Fig. 3).
• Turn off the vacuum cleaner and the
power nozzle then unplug the power cord.
• Remove the object preventing the
brushroll from turning.
When the unit is turned back on, the red
warning indicator lights in the headlight
lens will be off if the jam has been
successfully removed.
Fig. 1
Fig. 2
Fig. 3
13