Worx HYDROSHOT WG644 Mode D'emploi page 15

HYDROSHOT . Recommend to use it with high
TM
pressure setting. (See Fig. P1, P2)
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Inspect the product for damaged or worn parts
before each use. Do not operate it if you find
damaged or worn parts. Contact your supplier or the
manufacturer for replacement parts.
Hose filter maintenance
Unscrew the hose filter from the hose and remove
the strainer. Rinse the parts with clean water before
reassembling. (See Fig. Q1, Q2)
Filter screen maintenance
Remove the hose adapter to get the filter screen.
(See Fig. R1, R2) Rinse it with clean water before
reassembling.
NOTE: When retightening the hose adapter, please
tighten securely. Otherwise, it may not draw any
water for proper operation.
WARNING: Any other servicing should be
performed by an authorized service
representative.
CLEANING/STORAGE
Before storage, completely drain all the water from
the machine and hose.
Clean the moulded plastic housing of the machine
using a soft brush and clean cloth. Do not use water,
solvents or polishes. Store in a secure and dry place
out of the reach of children. Do not place other
objects on the product.
Store the machine and the accessories in a frost free
place.
Cordless Portable Power Cleaner
15
EN