Schauer Charge Master CM6A Manuel De L'utilisateur page 5

 Charge & Maintain - Automatic Maintenance: The battery charger could be left
unattended and it is full time managed by program; when the battery is charged to
"full" state, the charger automatically switches to maintain the battery. It will monitor
the battery voltage and continue to peak performance with special pulse charge in
long term maintenance.
 Short circuit or Reverse polarity protection: The charger will automatically turn off
when the output short circuit or reverse polarity occurred and prevent any damage.
 Never overcharge your battery
 Heavy-Duty cables
 Corrosion-resistant output connectors
 Output clips and ring terminals provided: It comes with a quick connect fly lead and
2 different kinds of connectors, crocodile clips and a ring terminals. The ring
terminals are perfect for permanent connection to your battery. You can connect the
lead to the battery and tuck the lead away while you are using your vehicle and when
you get back to your garage simply plug the lead back into the charger.
TEMPERATURE & SAFETY PROTECTION:
The charger contains the following safety protections:
 INTERNAL OVERHEAT PROTECTION: The battery charger is built-in with overheat
and overload electronic circuit. When the charger is overheated, the charger will
decrease the charging current. If temperature is decreased, the charger will resume
to normal charging.
 TIMER PROTECTION: The charger provides the maximum charging timer
management for each charging stage; this condition may occur if attempting to
charge any severely discharged or heavily sulfated battery. Once the charger is
timed-out, the charger will stop charging for protecting your battery and the RED
LED will be FLASH fast, while this situation occurs, please check with your battery
statues.
 REVERSE POLARITY: The charger has reverse battery protection. If a reverse
battery exists (Red LED ON, while output leads are connected backwards), simply
unplug charger from AC power and properly remake the connections as described
in this manual.
 SHORT CIRCUIT PROTECTION: The charger has output short-circuit protection. If
the charger output lead short condition exists (Red LED ON, while output leads are
connected backwards), simply unplug charger from AC power and properly remake
the connections as described in this manual. The charger employs the firm
hardware and smart program to automatically detect the output connections. Once
the charger detects the output short-circuit or reverse polarity, it will not deliver any
output current.
ECO MODE FOR ENERGY SAVING:
This battery charger has built in ultra-low power consumption circuit and operated with very
high power efficiency, the charger will automatically go into ECO mode if load unattached.
During ECO mode, the power drawn is less than 0.7W, equal to power consumption of
5