Dmx Linking - Chauvet Professional VESUVIO RGBA Guide De Référence Rapide

Vesuvio™ RGBA QRG
Contact
What Is
Included
AC Power
AC Plug
Resetting the
Breaker

DMX Linking

DMX Connection
·
From outside the U.S., UK, Ireland, or Mexico, contact the distributor of
record to request support or return a product.
·
From inside the U.S., UK, Ireland, or Mexico, use the information in
Contact Us at the end of this QRG.
·
Vesuvio™ RGBA
·
Neutrik® powerCON® power cord
This product has fixed-voltage power supply that can work with an input voltage
of 120 VAC, 60 Hz.
Connection
AC Live
AC Neutral
AC Ground
This product is equipped with a resettable circuit breaker. If the breaker trips, all
sections of this product will lose power. To reset the breaker:
1. Disconnect this product from power.
2. Allow unit to cool for 15 minutes.
3. After 15 minutes, you may attempt to reset the breaker by pressing the button
with your finger.
4. Plug the product's power cord into the power outlet and continue using as
recommended.
The Vesuvio™ RGBA will work with a DMX controller using a 3- or 5-pin DMX
serial connection.
www.chauvetprofessional.com.
The Vesuvio™ RGBA uses a 3- or 5-pin DMX data connection for its 9 channel
DMX personality. See the User Manual for information about connecting and
configuring the product for DMX operation.
·
·
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
A DMX Primer
3
Warranty Card
Quick Reference Guide
Screw Color
Brown Yellow/Brass
Blue
is available
EN
Silver
Green
from