Setting The Timer; Setting The Light Intensity - Philips goLITE BLU HF3321 Mode D'emploi

EnglisH
14

setting the Timer

1 Press the on/off button briefly to switch on the appliance (Fig. 7).
2 Press the on/off button one or more times to select the preferred
time (15, 30, 45 or 60 minutes) (Fig. 10).
The corresponding segment or segments of the time indicator will
,
blink for 3 seconds.
When the time indicator stops blinking, the LED panel goes on and
,
the timer starts counting down the set time.
Note: If you want to set the timer to 0 minutes, press the on/off button until
all segments of the time indicator are off.
Note: The time indicator only shows the time remaining.

setting the light intensity

1 Press the on/off button briefly to switch on the appliance (Fig. 7).
2 Press the light intensity button repetitively and the light intensity
options of low, medium and high will be displayed (Fig. 11).
3 Choose the light intensity desired.
Cleaning
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
1 Clean the appliance with a dry cloth.
This appliance has no other user-serviceable parts. For assistance call
1-866-832-4361.
_HF3321_goLITE.indd 14 6/17/10 1:32 P