Using The Appliance - Philips goLITE BLU HF3321 Mode D'emploi

The appliance turns on and the segments of the timer indicator go
,
on and off in a rotating pattern.
The LED panel goes on at the low light intensity level.
,
Note: The appliance remains turned on in demo mode until it is turned off.
To deactivate the demo mode, press and hold the on/off button and light
intensity button together for 3 seconds.
Note:If the appliance has been in DEMO mode for 10 hours, or it is
unplugged, the appliance will turn off, and the DEMO mode will be
deactivated.

Using the appliance

Use this appliance for its intended household use as described in this
manual.
1 Put the adaptor in the wall outlet and insert the appliance plug into
the socket on the appliance (Fig. 4).
2 Press the on/off button briefly to turn on the appliance (Fig. 7).
The first segment of the time indicator goes on and blinks for 3
,
seconds (Fig. 8).
When the time indicator stops blinking, the LED panel goes on and
,
the timer starts counting down to the set time (Fig. 9).
Note: The timer is automatically set to 15 minutes.
Note: The LED panel only goes on after the time indicator stops blinking.This
prevents the light from shining into your eyes while you are setting the time.
3 If you want to switch off the appliance before the set time has
elapsed, press the on/off button 2 seconds.
Note: You can also switch off the appliance by briefly pressing the on/off
button a few times.
Note: The appliance will automatically switch off after the set time duration.
4 Unplug the appliance after use.
_HF3321_goLITE.indd 13
EnglisH
13
6/17/10 1:32 P