Technical Specifications; Special Accessories - Kärcher SE 2 Car Mode D'emploi

Troubleshooting
No water exiting from nozzle
 Fill up fresh water reservoir.
 Sieve in the fresh water container clogged.
 Thermal protection switch has switched off the
pump as it was overheated. Switch off appliance
and let it cool down (approx. 20 - 30 min).
 Detergent pump defective, contact customer ser-
vice.
Spray stream uneven
 Clean the spray nozzle of the washing nozzle.
Insufficient vacuum performance
 Close the surrounding air separator at the handle.
 Accessories, suction hose or suction tubes are
clogged, please remove the obstruction.
 Filter bag is full: Insert new filter bag.
 Flat fold filter is contaminated, use filter cleaning
mechanism, remove the flat fold filter if heavily
soiled and clean it (see chapter "Cleaning flat fold
filter").
Detergent pump noisy
 Fill up fresh water reservoir.
Strong foam generation in the container
 Use the correct detergent from KÄRCHER.
Order no. 6.295-771.0 carpet cleaner RM 519.
Appliance is not running
 Plug in the mains plug.

Technical specifications

Voltage
1~50-60 Hz
Output P
nom
Output P
max
Mains fuse (slow-blow)
Sound pressure level (EN
60704-2-1)
Weight (without accessories) 7,1
Subject to technical modifications!

Special accessories

Filter set (5 pc.)
Flat fold filter
Washer nozzle for cleaning uphol-
stery
Carpet cleaner RM 519 (1 l bottle)
International
Textile waterproofing-agent
Care Tex RM 762 (0.5 l bottle)
International
16
220 - 240 V
1200 W
1400 W
10 A
77 dB(A)
kg
Order No.
6.904-143.0
6.414-498.0
2.885-018.0
6.295-771.0
6.295-769.0
EN
– 10