Kermi MBC-NM Serie Mode D'emploi page 58

 Ensure that there are no objects on the weighing pan.
 Wait for stability display "STABLE", then confirm with
 The size of the currently set adjustment weight is displayed,
the active site flashes.
(example)
If required, select with
the digit with
Confirm with
 Put the required adjustment weight carefully in the centre of

 Wait until stability display „STABLE" appears
 Confirm with
After the adjustment the balance will carry out a self-test. Remove
adjusting weight during selftest, balance will return into weighing
mode automatically.
An adjusting error or incorrect adjusting weight will be indicated
by the error message; repeat adjustment procedure.
An adjusting error or incorrect adjustment weight will generate an
error message („Err 4"), repeat the adjustment process.
28
.
, [LoAd] appears
the weighing pan.
[PASS] is displayed.
he digit to be altered and change
MBC-BAPS-e-1820