Kermi MBC-NM Serie Mode D'emploi page 57

Procedure:
 Turn on the scale during the self-test press

 Press
 Press
Operate adjustment switch; for position see chap.13
Press
 Press

 Press

 To change select scale type with

 Press
 Confirm with
MBC-BAPS-e-1820
function [F1 oFF] is displayed.
repeatedly until "t CH" is displayed.
, [Pin] is displayed
, and
, „P2 CAL" will be displayed
, the currently set balance type is displayed.
SnGrA = single range balance
dUArG = dual range balance
[dESC] appears.
repeatedly until „CAL" will be displayed.
, [UnloAd] appears
subsequently, [P1 SPd] will appear
and confirm with
, the first
,
27