Hold Function (Standstill Function); Feeding Function (Control Of Weight Gain) - Kermi MBC-NM Serie Mode D'emploi

 When the balance is unloaded the saved taring value is
 To delete the stored tare value, release scales and press

8.3 Hold function (Standstill function)

The balance has an integrated standstill function (mean value calculation). This
allows one to weigh the baby exactly, even if it is not restful in the weighing pan.
 Start balance by pressing
 Put the baby in the centre of the weighing pan Press
 The weight of the baby will be displayed and „frozen".
 After unloading the balance, the weighing value remains
(Beispiel)

8.4 Feeding function (control of weight gain)

The baby's weight can be saved before feeding. Then the weight gain can be
calculated by pressing a button.
 Start balance by pressing
 Place the baby on the weighing pan center before feeding.
 After the stability display shows STABLE", press
(example)
18
displayed with negative sign.
Wait for "0.000" display to appear.
button, „--------„ is displayed. In addition the „HOLD" symbol
appears.
displayed for approx. 10 seconds, than the balance returns
automatically into the weighing mode.
The „HOLD" symbol disappears.
Stability display await "STABLE"
weight of the baby is recorded and stored. Display "DRINK"
lights up.
.
.
MBC-BAPS-e-1820
.
. The