Operation; Weighing; Taring - Kermi MBC-NM Serie Mode D'emploi

8 Operation

8.1 Weighing

 Start balance by pressing
 However, you can reset the weighing scale to zero by pressing
 Put the baby in the centre of the weighing pan.
 Wait for stability display "STABLE", then read the weighing
 If the baby is heavier than the max. weighing range, the display

8.2 Taring

The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the baby is displayed in subsequent weighings.
 Put object (such as towel or padding) on the weighing pan.
 Wait until stability display „STABLE" appears
(example)
 Press
 Put baby on the weighing pan.
(example)
MBC-BAPS-e-1820
The balance will carry out a self-test
The scales are ready for operation as soon as the weight
display for "0.0kg" has appeared.
the key.
result.
shows "oL" (overload) and a beep sounds.
, the zero display appears.
Wait until the stability display „STABLE" appears, then read
the weighing result. „NET" is shown at the bottom on the left.
17