Husqvarna 967322501 Manuel D'instructions page 9

INSTALLING CAST WEIGHTS
1. Set the mount bracket (A) onto the frame tube just behind
the caster pivot (B).
NOTE: Mount brackets can be placed on either the inboard or
outboard side of the frame tube.
2. Press down on the mount bracket until it is securely
snapped into place on the frame.
3. Push the cast weight (C) into mount bracket, locking the
release lever (D) against the side of the frame tube.
4. Place the detent pin (E) through the hole in the mount
bracket to secure the weight.
C
A
ASSEMBLY
E
D
B
9