Functional Description And Specifications - Bosch HDC100 Consignes De Sécurité/D'utilisation

161992A071-HDC100_HDC100 1/10/14 1:02 PM Page 3

Functional Description and Specifications

To reduce the risk of injury user must read instruction manual for the use of the tool
W RNING
with this attachment.
For use with models 11253VSR, 11255VSR, RH228VC, RH328VC, 11536VSR,
FIG. 1
CORE BIT
D PTOR
Disconnect the plug from
W RNING
the power source before
making any assembly, adjustments or
changing accessories. Such preventive
safety measures reduce the risk of starting
the tool accidentally.
REMOVING AND INSTALLING DUST
EXTRACTION SYSTEM
First remove the auxiliary handle that comes
standard with the tool. To remove, loosen the
SAVE THESE INSTRUCTIONS
HDC100 Dust Extraction Attachment
11536-C, RHH181-01
FRICTION
DUST SE L
DUST
C P
DEPTH ST
OP
BUTTON
Assembly
FIG. 3
UXILI RY
H NDLE
RING
HOUSING
CL MP
TELESCOPIC
LEVER
GUIDE
hand grip and remove the handle from the tool
(Fig. 2).
To install the dust extraction attachment, slide
the clamping band of the auxiliary handle over
the chuck until the band rests on the barrel of
the tool. Then securely tighten the hand grip
(Fig. 3).
FIG. 2
-3-
HOUSING
DUST
PORT