Power Supply; Precautions Of Use - URBANGLIDE Bike-100 Pro Mode D'emploi

- DST: number of kilometres travelled on the last trip.
- TIME: time of use of the product since its ignition.
b) Lighting – ON/OFF
Click once to turn on the bike. Stay pressed for a few seconds on the button to
turn it off.
c) Speed adjustment
Click once to change the maximum speed of the bike:
- 1: Maximum speed 15km/h.
- 2: Maximum speed 20km/h.
- 3: Maximum speed 25km/h.
Double-click to change the content displayed in the middle of the screen:
- VOL: bike tension.
- Km/h: current speed.
- Mp/h: kilometres travelled per hour.
Keep pressing the button for 5 seconds to activate cruise control. A small white square
appears at the top of the dial when it is activated. Cruise control helps stabilize the
bike's speed even when you're not accelerating.
Stay pressed again for 5 seconds to remove the cruise control. The small white square
will disappear when it is disabled.
P
OWER SUPPLY
The charger supplied with the product is specific to the product. Using another charger
may damage the product or cause accidents.
Do not touch substances leaking from the battery. Do not let animals and children touch
the battery. Batteries contain dangerous substances, do not open the battery, do not
insert anything into the battery.
If the storage temperature is below 0 ° C, do not charge the product. You can place it in
a temperate environment (over 10 ° C) for charging. Do not leave the product charged
unattended. Do not let the product charge more than 3 hours.
Warning! Air transport of your product may be regulated or prohibited because of the
lithium battery.
P
RECAUTIONS OF USE
We are not responsible for the improper use of the product. Don't use the product in
heavy rain or when the temperature is -5 ° C or + 45 ° C.
5