Media Play; Connecting A Usb Device - Samsung 5 Serie Manuel De L'utilisateur

Media Play

Connecting a USB Device

1. Press the POWER button to turn the TV on.
2. Connect a USB device containing photo, music and movie files to the USB jack on the side
of the TV.
Media Play only supports USB Mass Storage Class devices (MSC). MSC is a Mass
N
Storage Class Bulk-Only Transport device. ( Examples of MSC are Thumb drives, Flash
Card Readers and USB HDD (USB HUB are not supported.). )
MTP (Media Transfer Protocol) is not supported.
N
The file system only supports FAT16/32 (The NTFS file system is not supported).
N
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
N
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility
N
problem.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not
N
responsible for any data file damage or data loss.
Do not disconnect the USB device while it is loading.
N
MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.
N
The sequential JPEG format is supported.
N
The higher the resolution of the image, the longer it takes to display on the screen.
N
The maximum supported JPEG resolution is 15360X8640 pixels.
N
For unsupported or corrupted files, the
N
If the number of photo files exceeds 4000 (or the number of music files exceeds 3000), any files exceeding the 4000 limit may not
N
be displayed in the Photo List (or Music List).
MP3 files with DRM that have been downloaded from a non-free site cannot be played.
N
DRM(Digital Rights Management) prevents illegal uses of digital media for copyright protection.
N
When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.
N
Not Supported File Format message is displayed.
English - 28
TV Side Panel
USB Drive