Power Supply Connections - Eneo MEB-62F0036P0A Mode D'emploi

Adjustment of viewing angle with 3-Axis bracket.
1. Lock/Unlock Screw
2. Sub-Lock Screw
CAUTION:
Extreme care should be taken NOT to scratch the surface of
window while the camera installing or adjusting. Care should be
taken the cable is NOT to be damaged, kinked or exposed in the
hazardous area. Do not expose the camera directly to a strong
light source such as the sun or spot light.
When assembling the front case, be sure that a Rubber sealing is
not protrusive. If the front case is tightened excessively, sealing
may not be ensured.

Power supply connections

Make sure the power is removed before the installation. Camera can be operated with the
regulated or unregulated DC12V but the regulated power supply of DC12V is recom-
mended. Camera is protected from the damage by the reverse connection of polarity..
Tilt
VIDEO (BNC)
POWER
Pan
Inclination
EN
9