Setting The Ip Address Through The Arp/Ping; Method - Avigilon 1.0-H3-B1 Guide D'installation

Setting the IP Address
Through the ARP/Ping Method
Complete the following steps to configure the camera to use a specific
IP address:
1. Locate and copy down the MAC Address (MAC) listed on
the Serial Number Tag for reference.
2. Open Command Prompt.
From the Windows Start menu, select Run... then enter
cmd in the Run dialog box and click OK.
3. In Command Prompt, enter the following commands:
a.
b.
4. Reboot the camera.
5. Close Command Prompt when you see the following
message:
Reply IP from <New Camera IP Address>: ...
12
arp -s <New Camera IP Address> <Camera
MAC Address>
For example: arp -s 192.168.1.10 00-18-
85-12-45-78
ping -l 123 -t <New Camera IP Address>
For example: ping -l 123 -t 192.168.1.10