Aiming And Focusing The Camera; For More Information - Avigilon 1.0-H3-B1 Guide D'installation

Aiming and Focusing the Camera

Use the Avigilon Camera Installation Tool to aim and focus the
camera. Consult the software user guide for more information.
1. In the Image and Display settings dialog box, use the
Zoom controls to achieve the desired zoom position for the
camera.
2. In the Image and Display settings dialog box, use the Auto
Focus button to focus the lens.
If the desired focus position was not achieved, use the
focus near and far buttons to adjust the focus.
Caution — Do not attempt to adjust the focus and zoom on
the camera itself or the camera lens may become damaged.

For More Information

Additional information about setting up and using the device is
available in the following guides:
• Avigilon Camera Installation Tool User Guide
• Avigilon Control Center Client User Guide
• Avigilon High Definition H.264 IP Camera User Guide
The manuals are available on the Avigilon website:
support/manuals/.
6
http://avigilon.com/