Led Indicators - Avigilon 1.0-H3-B1 Guide D'installation

LED Indicators

Once the camera is connected to the network, the connection status
LEDs will display the camera's progress in connecting to the Network
Video Management software.
The following table describes what the LEDs indicate:
Table:LED Indicators
Connection Connection
State Status LED
No Link Off
Obtaining IP One short
Address flash every
second
Connecting Two short
to NVR flashes every
second
Upgrading Two short
Firmware flashes and
one long flash
every second
Connected On
10
Description
Not physically connected to any
network device.
Attempting to obtain an IP address.
An IP address has been obtained and
is attempting to connect to the server
Updating the firmware.
Connected to the Network Video
Management software.