Setting The Ip Address Through The Arp/Ping; Method - Avigilon 1.0W-H3PTZ-DP20 Guide D'installation

Setting the IP Address
Through the ARP/Ping Method
Complete the following steps to configure the camera to use a specific
IP address:
1. Locate and copy down the MAC Address (MAC) listed on
the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following
commands:
a.
b.
3. Reboot the camera.
4. Close the Command Prompt window when you see the
following message:
Reply from <New Camera IP Address>: ...
14
All manuals and user guides at all-guides.com
arp -s <New Camera IP Address> <Camera
MAC Address>
For example: arp -s 192.168.1.10 00-18-
85-12-45-78
ping -l 123 -t <New Camera IP Address>
For example: ping -l 123 -t 192.168.1.10