Auto Reconnect; Calling; Answering A Call; Transferring A Call - LG Tone Infinim HBS-900 Manuel D'utilisation

Calling Function
- Voice Dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
Call Waiting
- While speaking on an active call, press the CALL button for 1 second to switch to an
incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To end both calls briefly press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the primary device.

Auto Reconnect

- If the HBS-900 is turned off (either accidentally or intentionally) while connected to
a handset, the headset and handset will disconnect. The headset and handset will
automatically reconnect when the HBS-900 is turned back on while in range.
- The secondary handset will need to be connected manually. Select LG HBS900 from
the list of devices in the Bluetooth menu and pair.
Out of Range
- If the paired devices are separated by a range of 33 feet (10 meters) or more, the
headset and handset will disconnect and the HBS-900 will vibrate to alert you.
* To turn off device vibration, slide the VOLUME switch to the + position and hold for 2
seconds.
- If the headset and handset do not automatically reconnect when they are back within the
required range, briefly press the CALL button on the HBS-900 to reconnect manually.
- While in multi-connection and streaming, the inactive paired device will be disconnected
when out of range. The HBS-900 will alert you once with no attempt to reconnect.

Calling

Answering a Call

- When there is an incoming call, the headset will ring and vibrate.
- Briefly slide the VOLUME switch to the - position to stop the vibration.
* HBS-900 will not vibrate if vibration function is on 'off'.
- Briefly press the CALL button to answer the incoming call.

Transferring a Call

- If you make a call from the handset, the call will (depending on the phone settings)
automatically transfer to the headset. If the call is not automatically transferred, you can
manually transfer the call to or from the headset by pressing the PLAY/PAUSE/STOP
button twice on the HBS-900 (handset and headset must be paired).
How to Use
7