Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
2
10
11
GB
Device description
1
Side grip
2
Die head locking ring
3
Support arm bracing point
4
Carry handle
5
Internal battery
6
ONE KEY indicator
7
Battery pack
8
Trigger
WARNING
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS FOR PIPE THREADERS
a) Always use the support device provided with the tool. Loss of
control during operation can result in personal injury.
b) Keep sleeves and jackets buttoned while operating the tool. Do
not reach across the tool or pipe. Clothing can be caught by the
pipe or the tool resulting in entanglement.
c) Only one person must control the work process and tool
operation. Additional people involved in the process may result
in unintended operation and personal injury.
d) Keep floors dry and free of slippery materials such as oil.
Slippery floors invite accidents.
Additional Safety and Working Instructions
• When threading or backing die head off pipe, firmly hold the tool
to resist forces regardless of support device used. This will reduce
the risk of striking, crushing and other injuries.
English
20
20
3
4
5
6
12
14
13
15
9
Control switch
10
Torque keys
11
Speed selector
12
Support clamp
13
Tightening arm
14
Support arm
15
Jaws
• Do not use dies that are showing signs of wear, dull, or damaged.
7
Sharp cutting tools require less torque and the tool is easier to
control.
• Only use:
• Rems Quick change 1/8
• Rothenberger Die Heads 1/4" ... 2" (with adapter rings)
• Ridgid 11-R 1/4" ... 2" (with adapter rings)
• Ridgid 12-R
8
• Do not store die heads in tool to prevent metal on metal
wear.
9
• Always use common sense and be cautious when using
tools. It is not possible to anticipate every situation that could
result in a dangerous outcome. Do not use this tool if you do not
understand these operating instructions or you feel the work
is beyond your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry important
information. If unreadable or missing, contact a MILWAUKEE
service facility for a free replacement.
WARNING
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
SPECIFIED CONDITIONS OF USE
This tool is specified for cutting pipe threads and bolt threads for
right and left hand threads up to 2" size. Other uses not for the
intended purpose are prohibited.
ASSEMBLY
WARNING
Only use accessories specically recommended for this tool.
Others may be hazardous.
Installing / Removing Die Heads
Die head can be inserted from either side of the tool.
Die head/adaptor must be inserted from the correct side of the tool.
1. Remove battery pack.
2. Assemble the die heads/adaptors as shown
3. Always check the die head is locked into the tool before starting
a cut.
4. To remove, unlock the die head lock ring and pull the die head
from the tool.
"
... 2" (with adapter rings)
Publicité
Table des Matières
