GE Druck DPI 705 Serie Manuel De L'utilisateur page 8

Pressure
Measurement
+
+
Enter PIN
Apply zero pressure
when stable
Apply mid-point
pressure when stable
Apply full-scale pressure
when stable
Three beeps calibration
accepted
END
K0214 Revision A
Calibration menu
Change PIN
Enter PIN number
Zero
Mid-point
Full-scale
Old PIN
New PIN
Old PIN
Three beeps new PIN
accepted
Set the pressure value using keys:
to increase
to decrease
Repeat the setting to confirm the
new PIN
Steps to the next digit to the
right. Loops back to the first
digit from the last digit.
Changing the PIN number
Each digit can be changed in turn.
Pressing:
increases the value of the digit
steps to next digit, see
enters the PIN number
6
PIN number
Configuration
overleaf
Enter old PIN
Enter new PIN
Verify new PIN
[EN] English