GE Druck DPI 705 Serie Manuel De L'utilisateur page 2

GE
Measurement & Control EC Declaration of Conformity
Product: DPI 705 and DPI 705-IS Digital Pressure Indicator
The above product(s) meets the protection requirements of the relevant EC Directives.
Supplier: Druck Ltd., Fir Tree Lane, Groby, Leicester LE6 0FH.
Tel: +44 (0) 116 231 7100 Fax: +44 (0) 116 231 7101
Signed:
For and on behalf of Druck Limited
Name: R. E. Jones
Directive Name
ATEX Directive
Electromagnetic Compatibility (EMC)
† The ATEX Directive only applies to apparatus marked with certificate number BAS02ATEX1194X
NOTES:
The apparatus must be used in accordance with its specifications, especially (but not limited to) pressure, electrical and temperature limits.
ATEX DIRECTIVE
The apparatus design has been subject to assessment for the following type of protection:
x
Intrinsically Safe (Ex ia), for Group II Category 1 G equipment – Ex ia IIC T4 Ga (-10°C ≤ Ta ≤ +50°C) – EC Type-Examination Certificate no.
BAS02ATEX1194X
The apparatus' design was assessed to the following harmonized standards:
x
EN 60079-0:2012 + A11:2013
x
EN 60079-11:2012
The type-examination for the above apparatus' design was carried out by Baseefa (notified body number 1180) – Baseefa Ltd, Rockhead
Business Park, Staden Lane, Buxton, Derbyshire, SK17 9RZ, United Kingdom.
The apparatus must be used in accordance with the supplied instructions for hazardous area equipment, K0214.
EMC DIRECTIVE
When appropriately installed the apparatus meets and exceeds the following industrial portable test and measurement equipment
specification:
x
EN 61326-1:2013
PRESSURE EQUIPMENT DIRECTIVE
The product has been assessed as equipment of relatively low hazard and has been designed within the bounds of 'sound engineering
practice' in line with the pressure equipment directive.
Page 1 of 1
UNCONTROLLED WHEN PRINTED OR TRANSMITTED ELECTRONICALLY
Relevant European Directives
General requirements
Equipment protection by intrinsic safety "i"
Electrical equipment for measurement, control and laboratory use. EMC requirements.
GE PROPRIETARY
i
Date: 2 nd November 2015
Position: Senior Engineering Manager
Directives
94/9/EC †
2004/108/EC
CD0043
Document
C
Revision