Zotac ION Guide De Démarrage Rapide page 6

1. Remove the rear I/O plate included with the case.
2. Install the rear I/O plate included with the motherboard.
3. Align motherboard with the corresponding mounting holes or stand offs inside
the case.
4. Secure the motherboard to the case using screws supplied with the case.
1. Locate the expansion slot for your GPU or expansion card (PCI
Express x16, PCI Express x1, PCI) and remove the slot cover from
the case.
2. Insert the GPU or expansion card into the proper slot.
3. Secure the GPU or expansion card into place using screws. Please
consult the case user manual if you have difficulty installing the GPU
or expansion cards.
1. Locate internal headers for the front panel I/O, USB, IEEE 1394 and audio.
2. Attach the corresponding cables and connectors to the headers.
PWR : POWER LED
PWR SW : POWER SWITCH
HDD : HDD LED
RST SW : RESET SWITCH
5