Zotac ION Guide De Démarrage Rapide page 5

1. Add a thin layer, typically a rice grain-sized dot in the center
of the CPU is sufficient, of thermal compound onto the CPU.
2. Consult the manual for your CPU cooler for installation
instructions.
3. Connect the CPU cooler fan to the CPU_FAN connector
located near the CPU. Failure to connect the CPU fan may
result in overheating.
1. Spread the retaining clips on the edges of the memory sockets that will be occupied. Align the
memory module so the tab on the memory and memory socket line up.
2. Insert the memory module vertically into the memory socket.
Press firmly on the edges of the memory module until the
retaining clips snap into place.
Note: Do not use excessive force to install memory modules. If
the memory module has troubles going into the slot, check the
orientation of the memory module to make sure it is properly aligned
with the memory slot.
1. Remove the side panels.
2. Install a power supply if necessary.
3. Install necessary stand-offs for the motherboard. Please consult the case
user manual for more details.
Note: Only use a power supply with sufficient capacity and wattage to
support your hardware. Using an underpowered power supply may result in
damage to hardware components.
4