Co2 Trigger & Cartridge Use - Lance Lab AR 8 Manuel D'utilisation

CO2
Trigger
EN
Adjustable Telescopic Lance
1. Remove the CO2 Trigger from the
top pocket of the carry case and
unscrew the lower casing off the trigger.
*Please note*
If you are using a non-threaded CO2
cartridge, please follow Step 2A
then proceed to step 3.
If you are using a threaded CO2
cartridge, please proceed to Step
2B and continue to step 3.
2B. Put your threaded CO2 cartridge
into the trigger and then screw the CO2
cartridge tightly into place. Firmly screw
the lower casing back onto the trigger
as shown above.
4. Remove the trigger strap from the top
pocket of the carry case.
-8-
& Cartridge use: AR 8
2A. Place your non-threaded CO2
cartridge into the lower casing and firmly
screw the lower casing back onto the
trigger.
3. Put the trigger into the lock
position as shown above.
5. Next pull the top strap through
the hole as shown above.