Lance Lab AR 8 Manuel D'utilisation page 13

Maintenance Instructions: AR 8
Adjustable Telescopic Lance
6. Insert the new section by sliding
it back into the lance.
8. Put the hose kit back through the
lance as shown above.
10. Refit the rubber end foot to the lance.
7. Refit using the new plastic threaded
connector and rubber gasket to section
7 (AR38-07). We recommend applying a
standard type super glue when refitting
the plastic threaded powder chamber
connector.
9. Now take the end of the main hose
kit (cut earlier) and push the new push
fit connector on. Take the 10cm part
(cut earlier) with the trigger connection
valve and push it to the other side of
the replacement push fit connector.
For detailed videos on the
maintenance process see:
www.lancelab.com
EN
-13-