Connections; Connecting To A Tv; Connecting To An Audio System - Samsung BD-H5500 Manuel D'utilisation

Masquer les pouces Voir aussi pour BD-H5500:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to
the HDMI IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
NOTES
` If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
Out on the player to an audio system to hear audio.
` An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV.
` When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
` A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
` To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
` HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
8
You can connect the Blu-ray player to an audio system using one of the methods illustrated
below.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HdMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product
to the HDMI IN jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with dolby digital or a dTS decoder
• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the
product to the Digital Coaxial In jack of the receiver.
Audio
• Good quality
Video
• You will hear sound only through the front two speakers with Digital Output set to PCM.

Connecting to an Audio System

Method 1
Audio
Method 2
Audio

Publicité

Table des Matières
loading

Table des Matières