Zanotti uniblock SB-SP O Instructions page 8

INSTRUCTIONS FOR P
INSTRUCTIONS FOR P
1. HOW TO SET THE PARAMETERS:
1A . Keep the keys
1B . "00" will be displayed.
1C . Press the key
1D . Confitm with
1E . The first parameter to be changed will be displayed.
To modify parameters see next section "Parameters modification".
2. PARAMETERS MODIFICATION:
To modify a parameter please follow the instruction given here under:
2A . Press or
(see user parameters).
2B . Press the key
2C . Modify the value pressing
2D . Press the key
parameter code.
2E . Repeat every operation code from point 2A in order to modify the other parameters' values.
3. MEMORIZATION OF NEW VALUES:
3A . Press the key
modification proceeding.
TO EXIT WITHOUT MODIFYING PARAMETERS : do not press any key for at least 60 seconds
(exit for TIME OUT).
ATTENTION: if you do not press the key
brought will be lost.
ARAMETERS MODIFICA
ARAMETERS MODIFICA
and pressed togheter for more than 5 second.
to display 22 (password).
.
to display the parameter of which you want modify the value
to display the value connected the parameter.
and
to confirm temporarily the new value and return to the display of the
to memorize all the new values and go out from the parameters
after the parameter changes, all the modifications
until you reach the required one.
8
TIONS
TIONS