Heating During The Transition Period; Cladding; Special Information; Cleaning - Olsberg Pacaya Compact Instructions

Heating during the transition period

Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much de-
pends on the external temperature. Therefore, if the exter-
nal temperatures are high (above 16°C) the delivery pres-
sure can be disrupted.
What to do?
● Open the combustion air slide valve complete.
● Only put on a small quantity of fuel.
● Frequently stoke the ash.

Cladding

● The cladding may not be overheated, as cracks could
appear.
● Use a maximum of 3 kg wood or briquette for heating.
● As the natural cladding comes from a „grown" boulder,
structure and colour scheme may be very different.
● The surface may be altered under temperature
influence.

Cleaning

What?
inside of stove
connection piece
glass panel
painted surfaces

Special information

The manufacturer's guarantee expires if the stove is sig-
nificantly or permanently overloaded above the nominal
heating output, or if fuels other than those listed are used.
● The stove must only be used with the combustion
chamber door shut.
● Never remove hot ashes. Only store ashes in a fireproof,
non-combustible container.
● Attention: The surfaces get hot! Always use the en-
closed glove when operating the stove.
● Convection air openings may not be covered.
● Never use white spirit, benzene or other inflammable,
hazardous materials to ignite the fire.
● The combustion air supply fittings must never be al-
tered. In particular, it must be ensured that any neces-
sary combustion air pies are open while the fireplace is
being used.
● Do not make any changes or modifications to the stove.
How often?
at least 1 x per year
at least 1 x per year
as required
as required
Using what?
hand brush,
vacuum cleaner
hand brush,
vacuum cleaner
when cold
using glass cleaner for
stoves- and oven glasses
when cold
with a slightly damp microfibre cloth
21