Télécharger Imprimer la page

Inglesina Tolomeo 2.3 IFIX Manuel D'instructions page 13

Siège auto

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
damages. The child car seat has to be
replaced with a new one to assure the
safety level.
- it is damaged, not equipped with the
instruction manual, or any component is
missing. Contact the Inglesina authorized
Retailer
or
Customer
immediately.
- if it is second-hand. There could be
extremely dangerous structural damage.
INSTRUCTIONS
LIST OF COMPONENTS
1
Adjustable headrest
2
Side protection
3
Armrest
4
Seat base
5
Headrest adjustment lever
6
Upper belt guide
7
Child car seat backrest
8
Lower belt guide
9
Isofix connectors
10 Isofix adjuster lever
11 Rear manual holder compartment
CHILD CAR SEAT POSITIONING IN THE
VEHICLE
2. The child car seat can only be used with an
automatic 3-point safety belt (A) and NOT with
a 2-point lap belt (B).
The child car seat can be secured in a forward-
facing position in the rear seats of the vehicle by
using the existing seat belts.
However, on some seats, if the installation is not
properly secured, we suggest you try another
seat in your vehicle.
Although not recommended, the child car seat
can be used on a passenger side front seat, so
long as there is no active airbag in place.
WARNING: Never use in a seat with an active
airbag.
USE CATEGORY
UNIVERSAL CATEGORY
INSTALLATION WITH THE VEHICLE'S
3
SEAT BELT
• The child is secured with the vehicle's safety
belt.
• The child car seat can only be installed in a
• The warranty acknowledged is valid for the
first owner of the product purchased.
• You must replace the child car seat and your
vehicles seat belts if they becomes badly worn
or damaged.
• If you have any queries please contact:
Care
Service
L'INGLESINA BABY S.P.A.
Via Lago Maggiore, 22/26 36077 Altavilla
Vicentina (VI) Italy - inglesina.com
front-facing position.
INSTALLATION WITH THE VEHICLE'S SEAT
• The child is secured with the vehicle's seat
belt.
• The child car seat is secured to the vehicle
with the two rear Isofix connectors.
4
4.1 Place your child in the child car seat and
make sure he is sitting correctly.
4.2 Pass the diagonal section of the vehicle seat
belt through the upper belt guide (6).
4.3 Pass the lap section of the vehicle seat belt
through the belt guide (8) under the armrest
next to the vehicle seat belt buckle.
4.4 Ensure that no part of the vehicle seat belt
has become twisted or trapped and that the
child car seat's fabric cover doesn't interfere
with the movement or correct fitting of the
vehicle seat belt.
5
5.1 Ensure that the diagonal belt lies gently
on the child's shoulder and the lap belt is worn
over the hips. Tighten the diagonal section of
the vehicle seat belt by pulling it upwards until
there is no slack and the belt holds the child
firmly in place.
5.2 To take the child out of the child car seat,
simply unfasten the seat belt and undo the
shoulder belt guide.
CHECK OF THE SAFETY BELT POSITION
6. To ensure the best protection for your child,
the shoulder belt must be guided so that it
BELT AND ISOFIX CONNECTORS
INSTALLING WITH THE VEHICLE'S SEAT
BELT ONLY
POSITIONING THE CHILD IN THE CHILD
CAR SEAT
13

Publicité

loading