Service And Customer Care - Kenwood ZJM810 Instructions

Masquer les pouces Voir aussi pour ZJM810:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
descaling
Regular descaling of the
l
flat element will improve the
performance of your kettle. If the
kettle is not descaled regularly the
build up of limescale may result in
the following:
problems may be experienced
l
with the kettle switching on and
off during use or switching off
before boiling.
the kettle may take longer to
l
boil.
the flat element may be
l
damaged.
Please note: Failure to descale your
kettle may invalidate your guarantee.
When limescale starts to build
l
up on the heating element, buy
a suitable descaler and descale
your kettle. After descaling, boil
with fresh water several times and
discard. Clean any descaler off the
kettle - it can damage the parts.
Some regions of the country have
l
chalky water. This makes boiled
water look cloudy and leaves a
deposit on the side of the kettle.
This is normal but can be removed
with regular cleaning.
Alternatively, to reduce limescale
l
build up, use filtered water to fill
your kettle.
service and customer
care
If you experience any
l
problems with the operation
of your appliance, before
requesting assistance refer to
the "troubleshooting guide"
section in the manual or visit
www.kenwoodworld.com.
Please note that your product
l
is covered by a warranty, which
complies with all legal provisions
concerning any existing warranty
and consumer rights in the country
where the product was purchased.
If your Kenwood product
l
malfunctions or you find any
English
defects, please send it or bring
it to an authorised KENWOOD
Service Centre. To find up to date
details of your nearest authorised
KENWOOD Service centre visit
www.kenwoodworld.com or the
website specific to your Country.
Designed and engineered by
l
Kenwood in the UK.
Made in China.
l
IMPORTANT INFORMATION
FOR CORRECT DISPOSAL
OF THE PRODUCT IN
ACCORDANCE WITH THE
EUROPEAN DIRECTIVE ON
WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT
(WEEE)
At the end of its working life, the
product must not be disposed of as
urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment
and health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked
with a crossed-out wheeled dustbin.
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zjm811

Table des Matières