Care And Cleaning; Service And Customer Care - Kenwood SJM610 Instructions

Your kettle will boil and switch off automatically. To re-
G
boil, wait a few seconds - the on/off switch needs
time to reset.
Note - To interrupt the boiling ensure that
the switch is in the off position before
removing from the powerbase.
If you experience problems with your kettle
G
switching on and off during use or switching
off before boiling, check that the flat
element is free from scale - see
"descaling".
Your kettle is fitted with a filter to hold back limescale
G
particles.
If you find drops of water under your kettle, don't
G
worry - it is just condensation.
boil-dry protection
If you switch on with too little water, your kettle will
G
cut out automatically. Switch off, remove from the
powerbase and let it cool down before re-filling. When
it has cooled down, the switch will reset itself.

care and cleaning

Before cleaning, unplug your kettle and let it cool
G
down.
the outside and powerbase
Wipe with a damp cloth, then dry. Do not use
G
abrasives - they will scratch the metal and plastic
surfaces.
the inside
Even though your kettle comes with a filter, you still
G
need to clean the inside (and the filter) regularly.
the filter
1 Open the lid.
2 Slide the filter out
3 either rinse under the tap or use a soft brush.
or when descaling your kettle, drop the filter in too.
Rinse thoroughly.
4 Slide the filter back in to refit
descaling
Regular descaling of the flat element will improve the
G
performance of your kettle. If the kettle is not
descaled regularly the build up of limescale may result
in the following:
problems may be experienced with the kettle
G
switching on and off during use or switching off
before boiling.
the kettle may take longer to boil.
G
the flat element may be damaged.
G
.
.
Please note: Failure to descale your kettle may invalidate
your guarantee.
When limescale starts to build up on the heating
G
element, buy a suitable descaler and descale your
kettle. After descaling, boil with fresh water several
times and discard. Clean any descaler off the kettle -
it can damage the parts.
Some regions of the country have chalky water. This
G
makes boiled water look cloudy and leaves a deposit
on the side of the kettle. This is normal but can be
removed with regular cleaning.
Alternatively, to reduce limescale build up, use filtered
G
water to fill your kettle.

service and customer care

If the cord is damaged it must, for safety reasons, be
G
replaced by KENWOOD or an authorised KENWOOD
repairer.
If you experience any problems with the
operation of the kettle, before calling for
assistance refer to the troubleshooting
guide.
If you need help with:
using your kettle
G
servicing or repairs
G
Contact the shop where you bought your kettle.
G
Designed and engineered by Kenwood in the UK.
G
Made in China.
G
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids
possible negative consequences for the environment
and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to
obtain significant savings in energy and resources. As a
reminder of the need to dispose of household
appliances separately, the product is marked with a
crossed-out wheeled dustbin.
5