Preparing Cable; Installing Soc-920(P) - Samsung SOC-920 Manuel D'installation

Preparing Cable

The following cable are required to install and use the SOC-920(P).
Cable
E
12

Installing SOC-920(P)

1. Choose an installation site that can sufficiently support the weight of the equip-
ments to be installed.
2. Attach the supplied template to the installation site, drill pilot holes (5 mm diam
eter, min. 35 mm depth), and then install and secure the supplied plastic
anchors (HUD 5).
3. Arrange them so that they will not be damaged or aught on anything when
installing the camera
4. Remove the DOME COVER to install the CAMERA.
1) Use the supplied L WRENCH to unfasten the 4
BOLTS for CASE fixing by turning them counter-
clockwise as shown in the illustration.
2) Disassemble the ASSY-DOME in the direction
shown in the illustration.
5. Install the CAMERA.
Align the CAMERA's installation holes to the
holes where the PLASTIC ANCHORS are
inserted and then fasten the ASSY SCREW-
TAPPINGS (TH M4 X 30) with O RINGS.
(2 spots)
E
1) 2)
13