Pairing With The Wx-Sr202P (Wired Connection) - Panasonic WX-ST400P Mode D'emploi

Pairing

■ Pairing with the WX-SR202P (wired connection)

Pair the microphone to a wireless receiver via a wired connection. The wired connection
uses a USB 2.0 cable (micro type B male to type A male; locally procured) and a
conversion cable (type A female to micro type B male; locally procured).
1
Remove the battery cover
Press on the portion labeled as
the battery cover and slide the cover downwards to
remove it.
2
Connect the microphone to the wireless receiver
Connect the [SET] connector of the microphone to the [SET] connector of the wireless
receiver via a USB 2.0 cable (micro type B male to type A male; locally procured) and
a conversion cable (type A female to Micro type B male; locally procured).
When connecting the cables, make sure that the conversion cable is attached to
the wireless receiver. If you connect the cables otherwise, you will not be able to
pair the microphone.
Connector for
[SET]
Conversion cable
(locally procured)
22
on the back of
Micro type B
Male
Type A
Female
A
USB 2.0 cable
(locally procured)
Micro type B
Male
Type A
Male
Connector for [SET]