Installing The Winstyler T180 Software; Windows 95/98/Nt 4.0- How To Install The Winstyler T180 Software - Ricoh 180 Manuel D'utilisation

Installing the WinStyler T180 Software

The WinStyler T180 includes a software installation program to make setting up
easier. The installation program analyzes the system configuration, installs the
WinStyler T180 software, and makes the necessary changes to Windows startup
files.
Note
If "New Hardware found" dialog appears, click on [Cancel].
To install the WinStyler T180 in Windows NT 4.0, you must have Administra-
tor privileges.
Windows 95/98/NT 4.0— How to Install the WinStyler T180
Software
Note
If the Regional Settings (sec. Control Panel ) are set for a language that the
WinStyler T180 supports, this language will be the default selection during
installation.
Follow the steps below to install the WinStyler T180 driver software:
A
Insert the WinStyler T180 CD-ROM in the CD-ROM drive.
B
Close all the applications that are currently running.
C
Click on [Start] on the Task bar.
D
Click on [Run].
E
In the "Run" window, click on [Browse].
F
Select the CD-ROM drive.
G
Select the file titled [SETUP.EXE] and click on [Open].
Note
If the language of the OS that you are using is not recognized, the installa-
tion program will offer the English version of the WinStyler T180 software.
H
Click on [OK].
I
Follow the instructions on the screen.
Note
This printer is automatically set as the default printer.
Installing the WinStyler T180 Software
9