Ribimex Ribiland 97cc Manuel D'instructions Et D'utilisation page 25

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

any fuel spillage occurs during refueling, use a dry rag to wipe up spills before turning the
engine back on again.
ATTENTION: Gasoline is a flammable and explosive product.
You can get burn or be seriously injured during handling.
• Stay away from any spark or flame
• Handle only in outdoors
• Clean if overflows
3.5- Oil
3.5.1- Oil level check
ATTENTION: always check the oil level before each use and startup
Running the engine with a low oil level can cause engine damage
Check the engine oil level with engine switched off and with pump on flat ground.
1. Remove the filler cap/dipstick [9] and wipe it clean.
2. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level
shown on the dipstick.
3. If the oil level is low, fill to the edge of the oil filler hole with the recommended oil.
4. Screw in the filler cap/dipstick securely.
3.5.2- Engine oil recommendations
Oil is a major factor affecting performance and service life.
Use 4-stroke automotive lubricating oil.
SAE 10W-30 is recommended for general, all-temperature use.
Other viscosities shown in the chart may be used when the average temperature in your area is
within the recommended range.
The SAE oil viscosity and service classification appear on the label on the oil container.
Fig. 4
Ambient Temperature
Fig.5
Page 25 of 54

Publicité

Table des Matières
loading

Table des Matières