Technical Data - Maxx-world NS-301 Mode D'emploi

EN
Use
We recommend smoothing or polishing your nails no more than
twice a month in order to protect them.
1. Make sure that your nails are clean, dry and free of oil or
grease.
2. Remove the protective cap from the device.
3. First smooth your nails. Mount the coarser grey smoothing
adapter on the pin.
4. Switch the device on. Select L (left rotation) or R (right rota-
tion) in accordance with your wishes.
5. Place the rotating adapter up against a nail and slowly move
it on the nail without applying pressure until it is smooth.
Check the treated area from time to time to prevent pene-
trating too deep into the nail and thus infl icting injury.
6. Once you have smoothed all nails, switch the device off.
7. Replace the adapter with the fi ne white polishing adapter.
8. Switch the device on and polish your nails until they shine.
9. Place the protective cap on the device when not in use.

Technical data

Product number: Z 03946
Model number:
Voltage supply:
24
NS-301
3 V DC (2 x 1.5 V batteries, type AAA)