Description Of The Appliance - Kärcher WD 3 Premium Home Mode D'emploi

CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.

Description of the Appliance

Illustrations on fold-out page!
These operating instructions describe the
multi-purpose vacuum cleaner shown on
the cover page.
When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
Suction hose connection
Illustration
 To connect the suction hose during vacuuming.
ON/OFF switch for appliance
Illustration
 Position I: Suction or blowing
Position 0: Appliance is switched off
Carrying handle
 To carry the appliance or to remove the appliance
head after unlocking.
Cable hook
Illustration
 To store the mains cable.
Blowing connection
Illustration
 Connect the suction hose to the blower connection,
this will activate the blower function.
Container closure
Illustration
 Pull out to open, push in to lock.
Parking position
Illustration
 To rest the floor nozzle during work interruptions.
12
Accessory mount
Illustration
 The accessories compartment allows the storage
of suction pipes and suction nozzles on the appli-
ance.
Steering roller
Illustration
 The steering rollers are located in the compartment
when the appliance is delivered. These must be at-
tached prior to starting up the appliance.
Filter bag
3x
Note: Do not use a filter bag for wet vacuuming!
Illustration
 Recommendation: To vacuum fine dust, use the
filter bag.
Cartridge filter
Illustration
 The cartridge filter must always be installed - with
wet and dry vacuuming.
Note: Let the wet cartridge filter dry prior to using it for
dry vacuuming.
Suction hose with connecting piece
Illustration
 Push the suction hose into the connection on the
appliance, it snaps in place.
 In order to disconnect it, push down with your
thumb and pull the suction hose out.
Note: Accessories, such as suction brushes (optional)
can be directly attached to the connecting piece and
thus connected to the suction hose.
For convenient working even in tight spaces.
See position 13.
The removable handle can be attached between the ac-
cessories and the suction hose if necessary.
Recommendation: In order to vacuum the floor, attach
the handle to the suction hose.
Removable handle
Illustration
 Connect the handle with the suction hose until it
snaps in place.
Illustration
 To remove the handle from the suction hose, press
the notch using your thumb and pull off the handle.
Note: Due to removing the handle, accessories can be
directly attached to the suction hose.
Recommendation: In order to vacuum the floor, attach
the handle to the suction hose.
See position 12.
– 7
EN