Kuzar HAMMER 73 Manuel D'emploi page 3

Industrial Lifter HAMMER 73
3. - SAFETY PRECAUTIONS.
3.1 - The HAMMER is a machine designed to elevate loads upwards in
a vertical direction, It should NEVER be used as a platform to elevate
people.
3.2 - Only place the lift on hard, flat surfaces always checking that it is in
a vertical position by using the bubble level indicator found on the base.
Adjust the leg stabilizers by turning the handles to level if necessary.
NEVER use wedges or other foreign objects to balance the lift.
3.3 - The maximum load indicated on the characteristics label and the
instructions manual should not be exceeded.
3.4 - This lifter should NEVER be used to elevate a load that has not
been properly checked. It is necessary to verify that the load is correctly
supported and centred on the appropriate lift support so that the weight
of the load will only elevate in a vertical direction.
3.5 - Check that the legs are placed and set-up correctly with their safety
pins inserted and locked.
3.6 - NEVER use the lift on a vehicle or any other mobile surface.
3.7 - If there is a possibility of strong winds or gusts, place the lift on the
ground firmly and secure it with the use of straps. NEVER attach a strap
to a vehicle or any other object that can possibly be moved.
3.8 - NEVER move the lift whilst it is carrying a load and elevated over
2.5m. It is not advisable to carry out any type of horizontal movement
even small positional adjustments. You can only move the lifter when is
load at minimum height.
Manual in ENGLISH
KUZAR SYSTEMS S.L. 3