Hansgrohe AXOR Starck 10133XX1 Mode D'emploi page 8

English
Position the sealing ring, escutcheon, and spout
on the mounting surface.
Install the mounting flange and mounting collar.
Tighten the mounting collar.
Turn to page 14 to continue the installation.
Carlton, Phoenix, Terrano, and Steel
Install the mounting nut, metal washer and the
fiber washer on the valve.
Insert the valve up through the mounting surface.
Install the stop ring on the valve.
Install the mounting flange. The stop ring will stop
it at the proper height.
Rest the valve on the mounting surface.
Tighten the mounting nut.
Tighten the tensioning screws.
8