Product Specification - Voyager BARNVIEW1 Manuel

Moniteur écran tactile quad 7 " lcd avec magnétoscope numérique et appareil photo
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT SPECIFICATION

Transceiver
Maximum channels
Communication Range
LCD Monitor Resolution
Camera Resolution
Operating Temperature
Operating Voltage
Current Consumption
Night Vision
Dimension
Battery
Recording Time for Memory Card (32GB max)
SD Card Capacity
1GB
2GB
8GB
16GB
32GB
Note: Single camera file recorded with video/audio; multiple camera file recorded with video only.
Battery Used In the LCD Monitor
The LCD monitor is fitted with a 3.7V 1800mAH (Li-ON) rechargeable battery pack.
If the power supply adaptor is kept connected to the monitor then the battery will begin recharging
until fully charged. The monitor can still be used if left connected to the power supply adaptor.
Note:
1.
From zero charge, the rechargeable battery takes approximately 8 hours to reach full charge.
2.
The rechargeable battery will maintain 80% of its efficiency within the 300 charge-discharge
cycle.
3.
The rechargeable battery is not user displaceable. Do not try to change the battery or remove
the battery.
Camera
Frequency: 2.405-2.480GHZ
Modulation : GFSK
Sensitivity: -82DBm
-
500 feet in open space
800 x 480
Single Camera: 480x272 / Multiple Camera: 320x240
-14
500mA (MAX)
5.9 x 2.9 x 1.9 inches
N/A
Single Camera
(Full Screen)
200 Minutes
400 Minutes
1,600 Minutes
3,200 Minutes
6,400 Minutes
Receiver
~ 122゚F
゚F
DC 5V / 1A
800mA (MAX)
26 feet
7.3 x 5 x 1.1 inches
3.7V 1800mAH (LI-ON)
Multiple Cameras
(QUAD Mode)
130 Minutes
260 Minutes
1,040 Minutes
2,080 Minutes
4,160 Minutes
4

Publicité

Table des Matières
loading

Table des Matières