Important Notice; Important Safety Precautions - Voyager BARNVIEW1 Manuel

IMPORTANT NOTICE

PLEASE READ BEFORE INSTALLATION
Always use discretion when installing CCTV equipment, especially when there is
perceived policy. Enquire relevant local regulations applicable to the lawful
installation of video recording/surveillance. Third party consent may be required.
WIRELESS DEVICES OPERATING RANGE
Ensure the signal reception viewed from the wireless camera(s) is the best possible
reception between the camera(s) and monitor. If necessary, reduce the distance
between the camera(s) and monitor to improve overall system performance. This
system operates on a secure digital 2.4GHz frequency which reduces interference
from products such as wireless routers, cordless phones, or microwave ovens.

IMPORTANT SAFETY PRECAUTIONS

Damages caused by non-compliance with this manual will void the warranty. We will not
assume any liability for damages to items or persons caused by improper handling or
non-compliance with the safety notices. Any warranty claim will be null and void in such
cases.
1. Do not drop, puncture or disassemble the camera or monitor.
2. Monitor - avoid all contact with water, and dry hands before using.
3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.
4. Use the devices with care. Avoid pressing hard on the camera & monitor.
5. Use only the accessories and power adapters supplied by the manufacturer.
6. Check that power cables do not get crushed or damaged by sharp edges.
FCC Compliance Statement:
device complies with Part 15 of the
FCC rules.
subjected to the following two
conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This
Operation is
Products with CE Marking comply with
EMC Directive (2004/108/EC); Low
Voltage Directive (73/23/EEC);
R&TTE(1999/5/EC); ROHS Directive
(2011/65/EU) issued by the Commission of the
European Community. Compliance with these
directives implies conformity to the following
European Norms:
EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328