Voyager BARNVIEW1 Manuel page 13

ICON
Camera Mode
Volume
System Settings
SD Capacity
Battery Capacity
Camera Number
Record Status
Connecting to the
Internet
Internet Connected
Intranet Connected
Remote View
Motion
Scheduled
Pop Up Menu Tab
No SD Card
Indicator
Zoom
WHAT THE ICON MEANS
Select how you want the Live screen to display camera input:
Scan between cameras (5 seconds)
Quad view (all paired cameras display)
Full view (1 camera displays on full screen)
Adjust the volume level.
Access the system software operation and setting page or view recorded
events.
Indicates memory capacity remaining.
Displays battery capacity. This graphic shows battery at nearly full.
Displays the camera number and signal strength through the status lines
to the left of the number.
Tap to start or stop recording for that camera
• Steady on - Not recording • Flashing - Recording
Connecting your system to the internet.
Connects your system to the internet.
Connects your system to the intranet.
Indicates remote viewing is in process.
System indicates motion detection recording in progress.
System indicates scheduled recording in progress.
Opens and closes the pop up menu display.
Displays red when the SD card is not present or is damaged.
Zoom in / out of a particular section of the live video