Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools Needed
■ Soft, water-resistant pad
■ Flexible scraper
■ Box knife
■ Long-reach 5/16" hex socket driver
■ Short Phillips screwdriver or ratchet nut driver with fl exible
shaft
■ Needle-nose pliers
■ Thread locking compound, semipermanent type (such as
Loctite 222 [blue])
■ Long-reach 5/32" Allen wrench
■ Flexible 5/16" hex socket driver
Service Kit Contents
■ (1) Foamed cooling unit assembly
■ (2) Thermal mastic tubes
■ (1) Plastic bag for shipping back to Norcold
■ (1) Flame spreader
■ (1) Flame spreader wire
■ (1) Heat cap
■ (1) Service kit information pack
•
(1) 1/2" Plastic bushing
•
(2) #8-32 x 1/2 " Phillips head screws
•
(1) #10-32 x 3/4 " Hex washer head screws
•
(11) #10-32 x 1/2 " Hex washer head screws
•
(1) Service kit instructions
■ Service kit - switch wiring
•
(2) Control wire assemblies
•
(1) Service kit instructions
■ Included in 632316 kit for N1095 models only
•
(1) Baffl e assembly
•
(3) Plastic pop rivets
•
(1) Condenser spacer
•
(1) Condenser clamp
•
(4) #10-16 x 1 1/2" Hex head self-drilling screws
•
(2) Cable tie mounts
•
(2) Cable ties
•
(1) Burner box base
•
(1) Burner box cover
•
(2) #8-18 x 1/2 " Hex head screws
Materials Not Included
■ (1) Silicone sealant and gun
■ Adhesive-backed aluminum tape,
2" x 12'
■ (4) Plastic tie wraps, 1/8" x 5"
www.norcold.com
Note:
Failure to follow these instructions may lead to poor cooling
performance and or unnecessary repairs.
Note:
Kit instructions are to be used with the support of the service
manual.
Note:
Have a healthy adult available; you will need help lifting items
several times during this procedure.
Note:
Keep all removed parts and materials for reassembly.
Procedures
To replace the cooling unit, follow the procedures in this order:
1. Shut Down
2. Disassemble
3. Replace Cooling Unit
4. Assemble
5. Restore Power
6. Power On / Test
Obey all safety messages! Complete procedure in the order pre-
sented.
Warning!
Doing the procedure out of order or ignoring safety
!
messages can have serious harmful effects including explosion,
fi re, electrical shock, and carbon monoxide production. Harmful
results could include serious injury, illness, death, or destruction
of property, either during service or after you have completed the
service.
Warning!
Eye hazard. Wear eye protection when servicing
!
the refrigerator. A punctured cooling system can spray fl uid that
can catch fi re or cause eye irritation or blindness.
Warning!
Be sure to use the heating elements included
!
in this kit. Failure to use new supplied parts could result in unit
not heating safely or effectively!
Warning!
The following procedure is to be performed
!
by authorized service personnel only. Improper installation,
adjustment, alteration, service or maintenance can cause
injury or property damage.
Note:
For effi ciency and ease, it is HIGHLY RECOMMEND-
ED that (space permitting) unit is laid on the fl oor to perform
service.
3
Publicité
Chapitres
Table des Matières
