Rodia 4050TS Manuel D'utilisation page 13

RODIA
CONTENTS
Chapter . . . . . . . . . . . . . . . . Page
General Power Tool Safety
Warnings . . . . . . . . . . . . . . . . . 13
Safety guidelines . . . . . . . . . . . . . 15
1 Technical data . . . . . . . . . . . . . . 16
2 Introduction . . . . . . . . . . . . . . . . 16
3 Safety regulations . . . . . . . . . . . . 16
4 Electricity and Safety . . . . . . . . . . 17
5 Characteristics . . . . . . . . . . . . . . 17
• Machine construction . . . . . . . 17
• Saw head . . . . . . . . . . . . . . . 17
• Saw cover . . . . . . . . . . . . . . 17
• Saw spindle . . . . . . . . . . . . . 17
• Saw table . . . . . . . . . . . . . . . 17
• Cooling system . . . . . . . . . . . 18
6 Unpacking and Set up . . . . . . . . . 18
• Setting up . . . . . . . . . . . . . . . 18
• Saw head . . . . . . . . . . . . . . . 18
• Cooling system . . . . . . . . . . . 18
• Connecting to power supply . . . 18
• Motor protection . . . . . . . . . . 18
• Installing the saw blade . . . . . . 19
7 Various sawing processes . . . . . . . 19
• One-step sawing . . . . . . . . . . 19
• Two-step sawing . . . . . . . . . . . 19
8 Safety . . . . . . . . . . . . . . . . . . . . 20
9 Maintenance . . . . . . . . . . . . . . . 20
10 Environmental protection . . . . . . . . 20
11 Troubleshooting . . . . . . . . . . . . . . 20
12 Declaration of Conformity . . . . . . . 21
13 Spare parts . . . . . . . . . . . . . . . . 22
NOTE: As our engineers are
constantly conducting research
and development on our machin-
ery to develop quality products
for the marketplace, our product
model(s) can be changed without
notice.
4050TS-4060TS
®
Carefully read the Instruction
Manual and the Safety Instruc-
tions before connecting the
machine to the power supply and
start using it.
GENERAL POWER TOOL
SAFETY WARNINGS
The term 'power tool' in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explo-
c) Keep children and bystanders away
2) Electrical safety
a) Power tool plugs must match the
13
WARNING: Read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions may result in
electric shock, fire and/or seri-
ous injury.
NOTE: Save all warnings and
instructions for future reference.
Cluttered or dark areas invite acci-
dents.
sive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes.
while operating a power tool. Distrac-
tions can cause you to lose control.
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
GB